plate,tubing,solid anything steel

twoslo4five0 · December 30th, 2009, 02:45 PM

thats right folks im now set up to sell dom,hrew,plate,channel or whatever else you can imagine and the best part is i can HAVE IT SHIPPED TO A BUINESS! thats right just pm me with what you need and where you need it shipped to and i can ship it right to there.

the only catch is i cant order one stick of tube or anything like that but if you place and order of 400 dollars or higher i can get it sent to you (without shpping) and as the time goes on and i have a little history with my vendor i can lower the amount to get to you guys.thanks guys!

Formud · December 30th, 2009, 05:37 PM

Do you have a listing of sizes and wall thicknesses you can get on DOM and HREW, both square and round, up to about 2 1/2"s ?

twoslo4five0 · December 30th, 2009, 06:15 PM

here is everything i can get.i can get sizes and stuff if needed.i can get about anything you can think of.

Bar

Rounds, Squares, Hexagons, Flats
Low, medium carbon
Screw machine stock
Chrome plated
Iron bar
As rolled, annealed, heat treated alloy
Leaded
Resulfurized

Tubing and Pipe

Round mechanical DOM, electric welded, seamless
Square and rectangular mechanical electric welded
Structural round, square, rectangular
Hydraulic fluid line
Pipe–ERW and butt welded

Structurals

Angles–Bar size & structural
Channels–Bar size, Standard, Ship & Car, Jr. Channels
Beams–Standard, Wide flange, Jr. Beams

also can get stainless,aluminum,nickel alloys,brass and copper.

extremetahoe · January 31st, 2010, 08:20 PM

What can you get 20ft sticks of 2" - 120 DOM for a foot? and 1.75-120 DOM in both DOM and HREW for both sizes. Thanks man. Need this ASAP if the price is right..

twoslo4five0 · January 31st, 2010, 09:17 PM

i need a quanity to get you a good price.if i price a single stick you will not want to buy any.get me a quanity (id try to go a little lower) and i will get you a price on that quanity.also do you have a buiness for it to be shipped to?you will need that and i will need the zip code as well

December 30th, 2009, 02:45 PM	#1
twoslo4five0 twoslo4five0 Enterprises Vehicle: 1977 banana boatsided linked stretched propane 1tons locked F&R exo 4.56 gears warn 8274 400/465/208 Join Date: Mar 2008 Location: chesterfield,va Posts: 5,465 Rep Power: 2626	plate,tubing,solid anything steel thats right folks im now set up to sell dom,hrew,plate,channel or whatever else you can imagine and the best part is i can HAVE IT SHIPPED TO A BUINESS! thats right just pm me with what you need and where you need it shipped to and i can ship it right to there. the only catch is i cant order one stick of tube or anything like that but if you place and order of 400 dollars or higher i can get it sent to you (without shpping) and as the time goes on and i have a little history with my vendor i can lower the amount to get to you guys.thanks guys!

December 30th, 2009, 05:37 PM	#2
Formud My hero!!! V Vehicle: 76,79,81,86, Step Side Join Date: Mar 2008 Location: Hatin...Clayton, Del Posts: 6,136 Rep Power: 4911	Do you have a listing of sizes and wall thicknesses you can get on DOM and HREW, both square and round, up to about 2 1/2"s ? __________________ 81,(WHAT USED TO BE) STEP SIDE BODY, 350 ON PROPANE, TH350,203/205 TRIPLE STICK, LOCKED DANA 60 FRONT, WELDED DANA 70HD REAR, 5.86 gears, 44" BOGGERS ON 15" BEADLOCKS, 12000LBS WINCH, OBA Everyone is entitled to be stupid, but some abuse the privilege SUPPORT OUR VENDORS formud@wheelindixie.com

December 30th, 2009, 06:15 PM	#3
twoslo4five0 twoslo4five0 Enterprises Vehicle: 1977 banana boatsided linked stretched propane 1tons locked F&R exo 4.56 gears warn 8274 400/465/208 Join Date: Mar 2008 Location: chesterfield,va Posts: 5,465 Rep Power: 2626	here is everything i can get.i can get sizes and stuff if needed.i can get about anything you can think of. Bar Rounds, Squares, Hexagons, Flats Low, medium carbon Screw machine stock Chrome plated Iron bar As rolled, annealed, heat treated alloy Leaded Resulfurized Tubing and Pipe Round mechanical DOM, electric welded, seamless Square and rectangular mechanical electric welded Structural round, square, rectangular Hydraulic fluid line Pipe–ERW and butt welded Structurals Angles–Bar size & structural Channels–Bar size, Standard, Ship & Car, Jr. Channels Beams–Standard, Wide flange, Jr. Beams also can get stainless,aluminum,nickel alloys,brass and copper.

January 31st, 2010, 08:20 PM	#4
extremetahoe Member Vehicle: Chevy Tahoe, 1999 Join Date: Mar 2008 Location: 209 acres in nowhere alabama Posts: 373 Rep Power: 1338	What can you get 20ft sticks of 2" - 120 DOM for a foot? and 1.75-120 DOM in both DOM and HREW for both sizes. Thanks man. Need this ASAP if the price is right.. __________________ 99 Chevy Tahoe ( No doors ) boat sided, narrowed, 5.7 l vortec, 4L60E, Atlas 5.0:1, custom SAS 56" front springs, 64" rear , shackle flip with custom revolver shackles, square shafts front and rear, D 60 4:10 power locked, 14 bolt FF 4:10's welded, disc brakes, 39.5 x 18-16.5 boggers beadlocked.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

January 31st, 2010, 09:17 PM	#5
twoslo4five0 twoslo4five0 Enterprises Vehicle: 1977 banana boatsided linked stretched propane 1tons locked F&R exo 4.56 gears warn 8274 400/465/208 Join Date: Mar 2008 Location: chesterfield,va Posts: 5,465 Rep Power: 2626	i need a quanity to get you a good price.if i price a single stick you will not want to buy any.get me a quanity (id try to go a little lower) and i will get you a price on that quanity.also do you have a buiness for it to be shipped to?you will need that and i will need the zip code as well